去結(jié)算

產(chǎn)品目錄

推薦產(chǎn)品ROME+

產(chǎn)品中心

美國ELECTROMATIC TI-25DL-MMX-EXT超聲波測厚儀

型號：	TI-25DL-MMX-EXT
所屬分類：	超聲波測厚儀
品牌：
報價：	市場價:面議

分享到：

美國ELECTROMATIC TI-25DL-MMX-EXT超聲波測厚儀

立即訂購加入收藏

美國ELECTROMATIC TI-25DL-MMX-EXT超聲波測厚儀- 詳細介紹：

美國ELECTROMATIC TI-25DL-MMX-EXT超聲波測厚儀

The TI-25DL-MMX can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25DL-MMX incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The TI-25DL-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Model Selection Guide

Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode
Model Number	Maximum Coating	Minimum Wall	Maximum Wall
All Models	0.020" (0.50mm)	0.100" (2.54mm)	6.000" (152.4mm)
Selection Guide - Thru-Paint (Echo-Echo) Model
Model Number	Maximum Coating	Minimum Wall	Maximum Wall
TI-25DL-MMX	0.040" (1.00mm)	0.100" (2.54mm)	1.000" (25.4mm)
TI-25DL-MMX-EXT	0.080" (2.00mm)	0.200" (5.08mm)	5.000" (127.0mm)

Range	Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe) 0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Resolution	.001" (0.01 mm)
Display	4½ - Digit, 0.5" Backlit LCD
Velocity Range	0.0492 to .3937 in./µs. (1250 to 10,000 meters/second)
Probe	5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface	PEEK (Polyethlethylketone)
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Serial Output	RS-232C (8, N, 1, user-set baud rate)
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	7 ounces (196 g)
Size	2.5 x 4.5 x 1.25" (64 x 114 x 32 mm)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days